Honeywell Enraf 1010 CB Programming Manual page 73

Product Streams (5)
Pump Off Delay Sets a time period between loads during which the pump may continue
7 - 3
Constraints: Only for Valve Type = Digital.
Enter a value in the following range:

1 to 300 second (10*)
to run. This reduces the number of pump starts.
This is applicable only during the same transaction, that is, for multiple
batches. The pump will shut down immediately if the transaction is
terminated.
Enter a value in the following range:

0 to 999 seconds (0*)
Model 1010 Application Pack CB
Programming Manual
Part No.: 4418024 - Rev. 1