Table of Contents
Advertisement
Programming Mode
2 - 3
☛ To exit Programming Mode, navigate to the main menu and then
press the Cancel key.
The system saves the current setup and returns the instrument to
operating mode.
2.2 Navigating in Programming Mode
☛ To scroll down the menu, press the Display key. To scroll up the
menu, press the Arm key.
☛ To select the highlighted item, press the Enter key.
☛ To select a menu item, press the number of that item.
For example, to select the SYSTEM from the main menu, press '2'.
You can move directly to an item in a sub-menu in the same way.
For example, to select GENERAL PURPOSE INPUTS from the
main menu, press '23'.
2.3 Entering or Selecting Values in Programming Mode
In programming mode the prompt indicates the type of input that is
required. If a parameter has neither a prompt nor parentheses, the
parameter cannot be altered.
Prompt
Input required
^
Alphanumeric
>
Numeric
( )
Select an option
Press the Clear key to correct or clear an entry.
2.4 Exiting the Programming Mode
Before exiting Programming Mode the instrument asks for confirmation
on saving the changed configuration settings.
☛ Select YES to save the settings.
Model 1010 Application Pack CB
Programming Manual
Table 2-1:
Do the following
Use the numeric keys and the Decimal Point key to
enter a Decimal Point.
Use the numeric keys and the Decimal Point key to
enter a Decimal Point.
Use the Arm key to change the sign after entering a
number.
Use the Display key to scroll through the options.
When the required option is highlighted, use the
Enter key to select it.
Part No.: 4418024 - Rev. 1
Hide quick links:
Advertisement
Table of Contents
