Honeywell Enraf 1010 CB Programming Manual page 90

Authorisation Entry Mode
SCREEN 10-1
SCREEN 10-2
10 - 4
10.3 Navigating in Authorisation Entry Mode
☛ To scroll down the menu, press the Display key. To scroll up the
menu, press the Arm key.
☛ To select the highlighted item, press the Enter key.
☛ To select a menu item, press the number of that item.
☛ To return to the previous menu, press the Cancel key. If you are in
the Authorisation menu, press Cancel to save the current setup and
return the instrument to operating mode.
10.3.1 Edit ID's
Use Edit ID's to enter or edit personnel and vehicle IDs. This involves
assigning media (touch key, NexWatch card, proximity card) or PIN
numbers to index numbers. The instrument can store 2750 personnel
and 2750 vehicle IDs. The index number is the position of the entry in
the list of 2750. The following steps apply to both personnel and vehicle
IDs. If both personnel and vehicle authorisation is used, enter the
Personnel IDs first.
1. From the Authorisation menu, select Edit ID's.
If both personnel and vehicle authorisation are enabled, the display
for personnel index will appear. Otherwise, if personnel authori-
sation is disabled and vehicle authorisation is only enabled, that
display will appear.
• If an ID has not been entered for the index number displayed,
the instrument displays a line on the bottom line of the display.
No Personnel ID at Index No. 1
• If an ID has been entered for the index number displayed, the ID
number is displayed on the bottom line.
Personnel ID at Index No. 1
2. Display the required index number by one of the following methods:
• Press the Display key to increment the index number by one.
• Select an index number using the numeric keys and the Enter
key.
Model 1010 Application Pack CB
Programming Manual
PERSONNEL INDEX#> PERSONNEL INDEX#>
============ ============
PERSONNEL INDEX#> PERSONNEL INDEX#>
00000052C470 00000052C470
1 1
1 1
Part No.: 4418024 - Rev. 1