System (2)
Manager Reset Message
Edit Line 1
Manager Reset Message
Edit Line 2
Wait for Manager
Message Edit Line 1
Deadman Message Select one of the following options:
Deadman Timeout
Message Edit Line 1
4 - 25
Use to compose a custom message of 20 to display on the top line of
the screen message area.
Constraints: Only if Manager Reset Message = Custom.
Top Line (20 Character alphanumeric Message)
Use to compose a custom message of 20 to display on the bottom line
of the screen message area.
Constraints: Only if Manager Reset Message = Custom.
Bottom Line (20 Character alphanumeric Message)
Use to compose a custom message of 20 to display on the top line of
the screen message area.
Constraints: Only if Manager Reset Message = Custom.
Top Line (20 Character alphanumeric Message)
4.8.3 Deadman Messages
Use the Deadman Messages sub-menu to set messages for the
Deadman function.
Constraints: Deadman timer must be enabled.
Standard* (Deadman Timeout)
Custom (As entered under Edit Line)
Use to compose a custom message of 20 to display on the top line of
the screen message area.
Constraints: Only if Deadman Timeout Message = Custom.
Top Line (20 Character alphanumeric Message)
Deadman Timer needs to be enabled prior to editing custom
messages
4.8.4 GP Input Messages
Use the GP Input Messages sub-menu to select the input message for
a particular arm or system input. Selection of either the fixed or standard
message is possible for these inputs. Following table lists different
Model 1010 Application Pack CB
Programming Manual
Part No.: 4418024 - Rev. 1