System Configuration - Panasonic HG-S Series User Manual

BEFORE USING THIS PRODUCT

2-2 System Configuration

The HG-S series consists of controllers, sensor head connection cables, and sensor heads.
For the controllers, master units (2 types) and slave units (5 types) are available. Up to 15 slave
units can be connected per master unit. (When communication unit consolidated: up to 14 slave
units)
For the sensor heads, 4 types are available.
When connecting slave units to a master unit, connect only NPN output types, or only PNP
output types. Dissimilar output types cannot be connected together.
Sensor head connection cable
Straight connector
CN-HS-C3 / Cable length 3m
CN-HS-C7 / Cable length 7m
CN-HS-C20 / Cable length 20m
L-shaped connector
CN-HS-C3L / Cable length 3m
CN-HS-C7L / Cable length 7m
CN-HS-C20L / Cable length 20m
2-4
SEN TRONIC
AG
Produkte, Support und Service
Controller - Slave unit
HG-SC111 / High-performance, NPN output type
HG-SC111-P / High-performance, PNP output type
HG-SC112 / Standard, NPN output type
HG-SC112-P / Standard, PNP output type
HG-SC113 / Wire-saving
Sensor head
HG-S1010 / General purpose, standard type
HG-S1010R / General purpose, low measuring force type
HG-S1110 / High-performance, standard type
HG-S1110R / High-performance, low measuring force type
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Rugghölzli 2 Tel. +41 (0)56 222 38 18
CH - 5453 Busslingen
Fax +41 (0)56 222 10 12
Controller - Master unit
HG-SC101 / NPN output type
HG-SC101-P / PNP output type
mailbox@sentronic.com
www.sentronic.com