System Configuration - Panasonic HL-G1**-A-C5 User Manual

1-1

System Configuration

1-1-1 System Configuration
The system configuration and equipment connecting cables are shown below.
Sensor head
(Standard type)
Sensor head
(High-function
type)
System Configuration Example with Setting Tools (HL-G1SMI) Used
USB-RS-422/485 converter
USB-RS-422/485 converter
Recommended: SI-35USB (LINEEYE made) or GT02 series or GT12 series
(Panasonic Industrial Devices SUNX made)
The user may use a different converter at the user's own discretion.
Dedicated software (to be downloaded from the website of Panasonic
Industrial Devices SUNX) is required if the GT02 or GT12 series is used
as a converter.
Ramco National
Unilateral extension
cable connector
(2 m, 5 m, 10 m, and 20 m)
USB cable
800-280-6933 | nsales@ramcoi.com
Analog output
Analog signal processing equipment
(A/D board and digital panel)
Each I/O
I /O control devices
(PLC etc.)
RS-422/485 communications
control equipment
RS-422/485 board
USB-RS-422/485 converter
RS-422/485
Dedicated compact console
RS-485 wiring
and others
can reach up to
16 units.
Setting and Monitoring
PC
Software HL-G1SMI
www.panasonicsensors.com