Introduction; Compliance With Emc And Low Voltage Directives - Mitsubishi Electric MELSEC Q Series User Manual

Thank you for purchasing the Mitsubishi Electric MELSEC-Q series C Controller module.
The present document, "MELSEC-Q C Controller Module User's Manual" provides descriptions on functions, programming,
maintenance and inspections, etc. required for use of the C Controller module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the C Controller module to handle the product correctly.
When applying the program examples introduced in this manual to the actual system, ensure the applicability and confirm that
it will not cause system control problems.
Relevant CPU modules: Q24DHCCPU-V, Q24DHCCPU-VG, Q24DHCCPU-LS, Q26DHCCPU-LS, and Q12DCCPU-V
COMPLIANCE WITH EMC AND LOW VOLTAGE
(1) C Controller system
For how to integrate the C Controller module compliant to the EMC and low voltage directives into customer'
product while maintaining the compliance with the EMC and low voltage directives, refer to any of the manuals
below:
• QCPU User's Manual (Hardware Design, Maintenance and Inspection)
• For Your Safety (manual supplied with the CPU module or the base unit)
At that time, replace the terms as follows:
• "programmable controller CPU"  "C Controller module"
• "programmable controller system"  "C Controller system"
For Ethernet twisted pair cables, replace the following term in descriptions on cables in "QCPU Module with
Integrated Ethernet Port" as follows:
• "10BASE-T/100BASE-TX connector"  "user Ethernet port or system Ethernet port"
The following shows measures particular to this product that are not stated in the above manuals.
(a) USB cable
Use a USB cable of 3m (9.84 feet) or less. Also, install the devices to connect within the control panel.
(b) PCI Express
Position any device to connect to the PCI Express
For details on PCI Express
(2) This product
This product complies with the EMC and low voltage directives. (The CE mark is printed on the rating plate of the
module.)

INTRODUCTION

DIRECTIVES
®
expanded connectors
®
expanded connectors, contact our local Mitsubishi representative or distributor.
®
expanded connectors within the control panel.
11