Mitsubishi Electric MELSEC Q Series User Manual page 476

2.
Device type replacement
The following device types are obsolete in Q12DCCPU-V (Extended mode).
If any of them is used in the user program to be replaced, change it to the processing indicated in
Substitute action.
Device types obsolete in Q12DCCPU-V
Device name
specification
QBFDev_LXBuf
QBFDev_LYBuf
QBFDev_LBBuf
QBFDev_LWBuf
Device types obsolete in Q12DCCPU-V
Device name
specification
3.
Compilation of replaced project
For the compilation method, refer to the following manual.
CW Workbench Operating Manual
(4) Script File replacement
Q12DCCPU-V (Extended mode) cannot register/add login user(s) by using script file.
Register login user(s) in Setting/monitoring tools for the C Controller module.
474
(Extended mode)
(Bus interface function)
Device
Link input internal buffer
(LX buffer)
Link output internal buffer
(LY buffer)
Link relay internal buffer
(LB buffer)
Link register internal buffer
(LW buffer)
(Extended mode)
(Melsec date link function)
Device
Own station link input internal
DevX
buffer (LX buffer)
Own station link output
DevY
internal buffer (LY buffer)
Own station link relay internal
DevB
buffer (LB buffer)
Own station link register
DevW
internal buffer (LW buffer)
Substitute action
Use the devices B and W (new devices available in
Q12DCCPU-V (Extended mode)) to perform link refresh with
the MELSECNET/H module and CC-Link IE Controller
Network module.
For link refresh, refer to the following.
Page 212, Section 13.2.1
Substitute action
Use the devices B and W (new devices available in
Q12DCCPU-V (Extended mode)) to perform link refresh with
the MELSECNET/H module and CC-Link IE Controller
Network module.
For link refresh, refer to the following.
Page 212, Section 13.2.1