Each Network Module Access Function; Cc-Link Ie Controller Network Module - Mitsubishi Electric MELSEC Q Series User Manual

13.4

Each Network Module Access Function

The network module access function transmits data to the network connected device(s) via network module(s)
controlled by the C Controller module.
This section describes network module access functions available for each network module.
For description of overall functions, refer to the following.
Page 209, Section 13.1 to Page 221, Section 13.3
13.4.1

CC-Link IE Controller Network module

Described below is the function to transmit data via CC-Link IE controller network module.
(1) Available functions
The following functions are available through the CC-Link IE Controller Network module.
(a) Available access methods
The following access methods are available.
Transmission
type
Cyclic transmission
Transient
transmission
(b) Available link devices
The following link devices are available.
• Link input (LX)
• Link output (LY)
• Link relay (LB)
• Link register (LW)
• Link special relay (SB)
• Link special register (SW)
*1 : Link device refresh is not available for the SB/SW. Use the direct access.
CHAPTER 13 FUNCTIONS ACCESSED VIA A NETWORK MODULE
Access method
Access by link refresh function
Direct access
Message communication
Other station device access
*1
*1
Q24DHC-LS
Q24DHC-V Q24DHC-VG
Q24DHC-LS
Q24DHC-V Q24DHC-VG
Reference
Page 212, Section 13.2.1, Page 226, (2) in this section
Page 217, Section 13.2.2, Page 228, (3) in this section
Page 221, Section 13.3.1, Page 229, (4) in this section
Page 223, Section 13.3.2
Q26DHC-LS
Q12DC-V
13
Q26DHC-LS
Q12DC-V
225