The User Program Does Not Start - Mitsubishi Electric MELSEC Q Series User Manual

(1) Error display in case of Build Spec unmatch
If the executable file's Build Spec is other than "PENTIUM4gnu", the following error message appears during
loading (Download, ld command of CW Workbench).
(a) When CW Workbench downloads an executable file
The following screen appears.
(b) When the ld command loads an executable file (from Telnet)
The following response is returned.
->ld(1,0,"/SD/Demo1.out")
ld(): error loading file (errno = 0x610001).
value = 0 = 0x0
Remark
The details of ermo can be checked by the printErrno command.
->printErrno 0x610001
errno = 0x610001 : S_loadElfLib_HDR_READ.
value = 0 = 0x0
23.4.9

The user program does not start

Check the following items
A large number of files and directories stored in the root
directory of the drive.
The user program task has not been started by the
script file.
The script file name is incorrect.
Check item
CHAPTER 23 TROUBLESHOOTING
Corrective action
The number of files and directories stored in the root
directory are reduced to 100 or less. Or, move to the
subdirectory. (Page 309, CHAPTER 18)
Start the user program task by using taskSpawn or sp.
Set the script file name to STARTUP.CMD.
23
407