Mitsubishi Electric MELSEC Q Series User Manual page 27

The following shows an operation sample of Setting/monitoring tools for the C Controller module.
Menu bar
[Example]
[Diagnostics]
Window selected in the view selection area is shown.
[Example]
Project view
"CCPU parameter"
View selection area
Remark
For details of operations of Setting/monitoring tools for the C Controller module, refer to the following.
Setting/Monitoring Tools for the C Controller Module Version 4 Operating Manual
The following table explains the C Controller module icons that indicate the function availability.
For "-LS", consult with the
partner (operating system vendor).
[CCPU diagnostics]
From [Diagnostics] in the menu bar
select [CCPU diagnostics].
"Parameter"
<<Name settings>>
Select the project view in the view selection area.
Then open "Parameter" in the project view
and select "CCPU parameter"
Select the <<Name settings>> tab in
the screen that appears.
Icon
Model
This icon indicates that the corresponding module model is available.
This icon indicates that the corresponding module model is available with
Model
restrictions.
Model
This icon indicates that the corresponding module model is not available.
This icon indicates that the availability of the corresponding module model
is different depending on the specifications of the partner operating
system.
For the function, specification, and operation method of the module,
consult the partner (operating system vendor).
Page 10, (2)
Description
Tab name
25