Mitsubishi Electric MELSEC Q Series User Manual page 393

Access
Device
method
Other station random
*8
access buffer
Random
*8
Other station RX
Random
*8
Other station RY
Random
*8
Other station link register
Random
Other station SB (special
*8
relay SB for CC-Link) Random
Other station SW (special
*8
register SW for CC-Link) Random
*1 : Accessible only for the following C Controller modules:
• Q06CCPU-V with a serial number whose first five digits are "10102" or higher
• Q12DCCPU-V (Basic mode) with a serial number whose first five digits are "12042" or later and Q12DCCPU-V (Extended
mode) with a serial number whose first five digits are "15102" or later.
• Q24DHCCPU-V/-VG
*2 : Accessible only for the following C Controller modules:
• Q12DCCPU-V (Basic mode) with a serial number whose first five digits are "12042" or later and Q12DCCPU-V (Extended
mode) with a serial number whose first five digits are "15102" or later.
• Q24DHCCPU-V/-VG
*3 : Access is not allowed for the A2ACPU(-S1).
*4 : For the access, use ZR (file register) or ER (extended file register).
*5 : Access is not allowed for the Q00JCPU.
*6 : Accessible only for the following C Controller modules:
• Q12DCCPU-V (Extended mode)
• Q24DHCCPU-V/-VG
• Q24DHCCPU-V/-VG
*7 : For B32768 or higher and W32768 or higher, accessible only for the following C Controller modules:
• Q12DCCPU-V (Extended mode)
• Q24DHCCPU-V with a serial number whose first five digits are "15102" or later
• Q24DHCCPU-VG
*8 : Indicates the access to the buffer memory of a CC-Link module (intelligent device station) installed with each CPU module.
Access is not allowed to multiple CPU systems (when the logical station number is specified).
CHAPTER 22 PROGRAMMING USING MELSEC DATA LINK FUNCTIONS
Device type
(Device name
specification)
Batch
DevRAB
Batch
DevRX
Batch
DevRY
Batch
DevRW
Batch
DevSB
Batch
DevSW
Access target
1) 2) 3) 4) 5)












: Accessible : Inaccessible
*1
6) 7) 8)
9)
391
22