Mitsubishi Electric MELSEC Q Series User Manual page 382

Device
Other station buffer memory
Other station random access
buffer
Other station RX
(remote input RX for CC-Link)
Other station RY
(remote output RY for CC-Link)
Other station link register
Other station SB (special relay SB
for CC-Link)
Other station SW (special register
SW for CC-Link)
*1 : Accessible only for the following C Controller modules:
• Q12DCCPU-V (Basic mode) with a serial number whose first five digits are "12042" or later and Q12DCCPU-V (Extended
mode) with a serial number whose first five digits are "15102" or later.
• Q24DHCCPU-V/-VG
*2 : Access is not allowed for the A2ACPU(-S1).
*3 : For the access, use ZR (file register) or ER (extended file register).
*4 : Access is not allowed for the Q00JCPU.
*5 : Accessible only for the following C Controller modules:
• Q12DCCPU-V (Extended mode)
• Q24DHCCPU-V/-VG
*6 : For B32768 or higher and W32768 or higher, accessible only for the following C Controller modules:
• Q12DCCPU-V (Extended mode)
• Q24DHCCPU-V with a serial number whose first five digits are "15102" or later
• Q24DHCCPU-VG
*7 : This function is used to send messages to a network module on the other station via a MELSECNET/H module.
Access is not allowed to a multiple CPU system (when the logical station numbers are specified).
380
Access Device type
method (Device name specification)
DevRBM
DevRAB
DevRX
Batch/
DevRY
Random
DevRW
DevSB
DevSW
Access target
1) 2) 3) 4)
: Accessible : Inaccessible
5) 6) 7) 8)

9)