Engine Cover Panel: Removing And Installing - Audi A8 2010 Maintenance Manual

2.2 Engine cover panel: removing and in‐
stalling
4-cyl. petrol engine 2.0 ltr. TFSI hybrid
6-cyl. petrol engine 2.5 ltr. FSI
6-cyl. petrol engine 3.0 ltr. TFSI (version 1)
6-cyl. petrol engine 3.0 ltr. TFSI (version 2)
8-cyl. petrol engine 4.0 ltr. TFSI
8-cyl. petrol engine 4.2 ltr. FSI
12-cyl. petrol engine 6.3 ltr. FSI
6-cyl. diesel engine 3.0 ltr. TDI (version 1)
6-cyl. diesel engine 3.0 ltr. TDI (version 2)
8-cyl. diesel engine 4.2 ltr. TDI
2.2.1 4-cyl. petrol engine 2.0 ltr. TFSI hybrid
Procedure for removing:
– Carefully pull engine cover panel off retaining pins one after
another -arrows-.
Procedure for installing:
– Position engine cover panel on retaining pins and then use
your hands to press it onto retaining pins, one after the other.
2.2.2 6-cyl. petrol engine 2.5 ltr. FSI
Procedure for removing:
– Carefully pull engine cover panel off retaining pins one after
another -arrows-.
Procedure for installing:
– Position engine cover panel on retaining pins and then use
your hands to press it onto retaining pins, one after the other.
⇒ page 15
⇒ page 15
⇒ page 16
⇒ page 16
⇒ page 16
⇒ page 17
⇒ page 17
⇒ page 17
⇒ page 18
⇒ page 18
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2010 ➤
Maintenance - Edition 11.2014
2. Preparations
15