Input Signal - Mitsubishi Electric MELSERVO-J5 User Manual

Input signal

List of supported input signals
Device name Symbol
Analog torque TLA
limit
Analog torque TC
command
Analog speed VC
command
Analog speed VLA
limit
Forward/reverse PP/NP/PP2/NP2/
rotation pulse PG/NG
train
Input signal explanation [A]
■TLA (Analog torque limit)
When TLA is enabled, all the torque generated by the servo motor is limited. Apply 0 V DC to +10 V DC between TLA and LG.
Connect the positive terminal of the power supply to TLA. The maximum torque is generated at +10 V.
MR-J5 User's Manual (Function)
If a value equal to or larger than the maximum torque is input to TLA, the value is clamped at the maximum torque.
Resolution: 12 bits
■TC (Analog torque command)
This is used to control all the torque generated by the servo motor. Apply 0 V DC to ±8 V DC between TC and LG. The
maximum torque is generated at ±8 V. The torque at ±8 V can be changed with [Pr. PC13].
MR-J5 User's Manual (Function)
If a value equal to or larger than the maximum torque is input to TC, the value is clamped at the maximum torque.
■VC (Analog speed command)
Apply 0 V DC to ±10 V DC between VC and LG. At ±10 V, the servo motor speed is the value set in [Pr. PC12].
MR-J5 User's Manual (Function)
If a value equal to or larger than the maximum speed is input to VC, the value is clamped at the maximum speed. When
changing the speed to the permissible speed, change the setting value in [Pr. PA28.4].
Resolution: 14 bits or its equivalent (MR-J5-_A_-RJ_: 16 bits or its equivalent)
For the MR-J5-_A_-RJ_ servo amplifiers, setting [Pr. PC60.1] to "2" changes the analog input resolution to 14 bits.
Model
G A
P
 
 
 
 
 
S T
 
 
 
 
 
3.5 Signal (device) explanation
I/O signal Detailed
interface type explanation
Page 85
AI-1
TLA (Analog
torque limit)
Page 85 TC
AI-1
(Analog torque
command)
Page 85 VC
AI-1
(Analog speed
command)
AI-1 Page 86
VLA (Analog
speed limit)
Page 86 PP/
DI-2
NP/PP2/NP2/
PG/NG
(Forward/reverse
rotation pulse
train)
3 SIGNALS AND WIRING
3
85