Mitsubishi Electric MELSERVO-J5 User Manual page 434

Ac servo system

Hide thumbs Also See for MELSERVO-J5:

Table of Contents

■Battery installation and removal procedure

• Fitting method

• Removal procedure

• Pulling out the connector of the battery without the lock release lever pressed may damage the CN4 connector of the servo

amplifier or the connector of the battery.

11 USING A DIRECT DRIVE MOTOR

11.8 Battery

Install a battery, and insert the

plug into the CN4 connector.

While pressing the lock release lever,

pull out the connector.

While pressing the lock release lever,

slide the battery case toward you.