Mitsubishi Electric MELSERVO-J5 User Manual page 379

■Absolute position linear encoder
The reference home position using an absolute position linear encoder is per 1048576 pulses based on the linear encoder
home position (absolute position data = 0). The stop intervals at homing can be changed with [Pr. PL01.2 Homing stop
interval setting]. For the specifications of the stop intervals at homing, refer to the following.
Page 370 Homing setting method
10
The specifications are the same as the ones when an incremental encoder is used.
10 USING A LINEAR SERVO MOTOR
377
10.4 Basic functions