Table of Contents
Advertisement
byte
1
2
Meaning of bit B:
B = 0 Single AS-i slave or A-slave
B = 1 B-slave
9.1.2.10 Get Extended Permanent Configuration (GET_PCD)
This call reads the following configuration data (configured data) of an addressed
AS-i slave stored on the EEPROM of the AS-i master:
• I/O configuration
• ID code
• Extended ID1 code
• Extended ID2 code
The configuration data are specified by the manufacturer of the AS-i slave.
byte
1
2
3
byte
1
2
3
4
Meaning of bit B:
B = 0 Single AS-i slave or A-slave
B = 1 B-slave
9.1.2.11
Store Actual Configuration (STORE_CDI)
With this call, the (actual) configuration data (I/O configuration, ID code, extended
ID1 code and extended ID2 code) of all AS-i slaves are stored permanently in the
EEPROM as the (expected) configuration data. The list of activated AS-i slaves
(LAS) is adopted in the list of permanent AS-i slaves (LPS).
When this command is executed, the AS-i master changes to the offline phase and
then changes back to the normal mode (warm restart on the AS-i master).
This command can only be executed in the configuration mode.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
7
6
5
2
2
2
T
7
6
5
2
2
2
T
–
–
B
7
6
5
2
2
2
T
xID2
ID
AS-i/CC-Link Gateway
Response
4
3
2
2
25
16
result
Request
4
3
2
2
26
16
circuit
slave address
Response
4
3
2
2
26
16
result
Copyright Pepperl+Fuchs, Printed in Germany
Mailbox
2
1
0
2
2
2
2
1
0
2
2
2
2
1
0
2
2
2
xID1
I0
39
Advertisement
Table of Contents
