Tacacs+ Statistic - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Group Server Name
IPv4 Address
IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the TACACS+ group server.
Click the Delete button to remove the specified entry.
After clicking the Show Detail button, the following page will be available.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.

TACACS+ Statistic

This window is used to view and clear the TACACS+ statistic information.
To view the following window, click Security > TACACS+ > TACACS+ Statistic, as shown below:
The fields that can be configured are described below:
Parameter
Group Server Name
Click the first Clear button to clear the information based on the group selected.
Click the Clear All button to clear all the information in this table.
Click the second Clear button to clear all the information for the specific entry.
Description
Enter the TACACS+ group server name here. This name can be up to 32
characters long.
Enter the IPv4 address of the TACACS+ group server here.
Enter the IPv6 address of the TACACS+ group server here.
Figure 7-19 TACACS+ Group Server Settings (Show Detail) Window
Figure 7-20 TACACS+ Statistic Window
Description
Select the TACACS+ group server name from this list here.
94