Configuration Restore From Tftp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP,
as shown below:
The fields that can be configured are described below:
Parameter
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.

Configuration Restore from TFTP

This window is used to initiate a configuration restore from a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP,
as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Figure 11-12 Configuration Restore from HTTP Window
Description
In this field the source configuration file's filename and path will be displayed
after selection. To navigate to the location of the configuration file located on
the local PC, either double click in the text box or click the Browse button.
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long.
• Select the running-config option to restore and overwrite the running
configuration file on the Switch.
• Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
Figure 11-13 Configuration Restore from TFTP Window
Description
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option
is selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the source filename and path of the configuration file located on the TFTP
server here. This field can be up to 64 characters long.
129