Cli Alias Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
After selecting the Edit button, the following page will appear.
The fields that can be configured are described below:
Parameter
Action
Privilege
Password
Click the Apply button to accept the changes made.
Click the Back button to return to the previous page.

CLI Alias Settings

This window is used to display and configure the CLI alias settings. A CLI alias command is a custom string that can
be associated with a specific CLI command. This is useful if repeated use of long commands are needed in the CLI.
To view the following window, click Management > CLI Alias Settings, as shown below:
The fields that can be configured are described below:
Parameter
Mode
Alias Command
Original Command
Click the Apply button to accept the changes made.
Click the Find button to find and displays the CLI alias commands based on the command mode selected.
Click the Delete button to delete the specified entry.
Figure 4-4 User Privilege Window
Description
Select to enable or disable user level security.
Select the privilege level here. The range is from 1 to 15.
Enter the password here. This can be up to 35 characters long.
Figure 4-5 CLI Alias Settings Window
Description
Select the command mode of the original command here.
Enter the alias command here. This can be up to 16 characters long.
Enter the original command here. This can be up to 128 characters long.
31