DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Security > SSL > SSL Service Policy, as shown below:
The fields that can be configured are described below:
Parameter
Policy Name
Version
Session Cache Timeout
Secure Trustpoint
Cipher Suites
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
SFTP Server Settings
This window is used to display and configure the Secure File Transfer Protocol (SFTP) server settings. SFTP is a
remotely secure file transfer protocol over a reliable data stream. Because SFTP itself does not provide authentication
and security, the SFTP server runs as a sub-system of the SSH server.
NOTE: Only IPv4 SFTP servers are supported.
Figure 7-29 SSL Service Policy Window
Description
Enter the SSL service policy name here. This name can be up to 32 characters
long.
Select the Transport Layer Security (TLS) version here. Options to choose from
are TLS 1.0, TLS 1.1, and TLS 1.2.
Enter the session cache timeout value used here. This value must be between
60 and 86400 seconds. By default, this value is 600 seconds.
Enter the secure trust point name here. This name can be up to 32 characters
long.
Select the cipher suites that will be associated with this profile here.
101