Firmware Backup To Rcp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to FTP, as shown
below:
The fields that can be configured are described below:
Parameter
FTP Server IP
TCP Port
User Name
Password
Source File
Destination File
Click the Backup button to initiate the firmware backup.

Firmware Backup to RCP

This window is used to initiate a firmware backup to an RCP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to RCP, as shown
below:
Figure 11-9 Firmware Backup to FTP Window
Description
Enter the FTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the FTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the FTP server in the space provided.
Enter the TCP port number used for the FTP connection here. The range is
from 1 to 65535.
Enter the user name used for the FTP connection here. This name can be up to
32 characters long.
Enter the password used for the FTP connection here. This password can be
up to 15 characters long.
Enter the source filename and path of the firmware file located on the Switch
here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be backed up to
the FTP server here. This field can be up to 64 characters long.
Figure 11-10 Firmware Backup to RCP Window
127