DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Status
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the available entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MAC Address Table
This window is used to view the entries listed in the MAC address table.
To view the following window, click L2 Features > FDB > MAC Address Table, as shown below:
The fields that can be configured are described below:
Parameter
Port
VID
MAC Address
Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding port.
Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding VLAN.
Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic MAC addresses.
Click the Show All button to display all the MAC addresses recorded in the MAC address table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Description
Select to enable or disable the MAC address learning function on the VLAN(s)
specified here.
Figure 5-6 MAC Address Table Window
Description
Select the port number on the Switch here.
Enter the VLAN ID that will be used for this configuration here.
Enter the MAC address that will be used for this configuration here.
55