Ddm Tx Power Threshold Settings; Ddm Rx Power Threshold Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Action
Type
Value
Click the Apply button to accept the changes made.

DDM TX Power Threshold Settings

This window is used to display and configure the threshold of TX power for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as shown below:
The fields that can be configured are described below:
Parameter
Port
Action
Type
Power Unit
Value
Click the Apply button to accept the changes made.

DDM RX Power Threshold Settings

This window is used to display and configure the threshold of RX power for specific ports on the Switch.
Description
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of bias current threshold. Options to choose from are Low
Alarm, Low Warning, High Alarm, and High Warning.
Enter the threshold value. This value must be between 0 and 131 mA.
Figure 8-6 DDM TX Power Threshold Settings Window
Description
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of TX power threshold. Options to choose from are Low Alarm,
Low Warning, High Alarm, and High Warning.
Select the power unit here. Options to choose from are mW and dBm.
Enter the threshold value either in mW or dBm here.
• When selecting mW in the Power Unit drop-down list, this value must be
between 0 and 6.5535.
• When selecting dBm in the Power Unit drop-down list, this value must be
between -40 and 8.1647.
107