D-Link DGS-3630 Series Reference Manual page 58

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Time Interval
Time
Date
Save Before Reboot
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified reboot schedule.
Description
Select and enter the reboot schedule time interval value here. The reboot will
be initiated after the specified time interval has passed. The range is from 1 to
43200 minutes (30 days).
Select and enter the time at which the reboot should be initiated here. This time
uses the 24-hour format, for example, 21:30. If the date was not specified, the
reboot will be initiated when the system clock reaches the time specified within
the next 24 hours.
Select and enter the date at which the reboot should be initiated here. This date
uses the following format: DD/MM/YYYY. For example, 23/12/2015. The reboot
schedule can only be initiated within 30 days of configuration.
Select this option to save all configuration changes made before the reboot is
initiated.
51