Firmware Backup To Sftp; Configuration Restore & Backup; Configuration Restore From Http - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Click the Backup button to initiate the firmware backup.

Firmware Backup to SFTP

This window is used to initiate a firmware backup to an SFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to SFTP, as shown
below:
The fields that can be configured are described below:
Parameter
SFTP Server IP
User Name
Password
Source File
Destination File
Click the Backup button to initiate the firmware backup.
Configuration Restore & Backup

Configuration Restore from HTTP

This window is used to initiate a configuration restore from a local PC using HTTP.
Description
Enter the RCP server IP address here.
Enter the user name used for the RCP connection here. This name can be up
to 32 characters long.
Enter the source filename and path of the firmware file located on the Switch
here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be backed up to
the RCP server here. This field can be up to 64 characters long.
Figure 11-11 Firmware Backup to SFTP Window
Description
Enter the IPv4 address of the SFTP server here.
Enter the user name used for the SFTP connection here. This name can be up
to 32 characters long.
Enter the password used for the SFTP connection here. This password can be
up to 15 characters long.
Enter the source filename and path of the firmware file located on the Switch
here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be backed up to
the SFTP server here. This field can be up to 64 characters long.
128