Configuration Backup To Http - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from SFTP,
as shown below:
The fields that can be configured are described below:
Parameter
SFTP Server IP
User Name
Password
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.

Configuration Backup to HTTP

This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as
shown below:
The fields that can be configured are described below:
Parameter
Source File
Figure 11-16 Configuration Restore from SFTP Window
Description
Enter the IPv4 address of the SFTP server here.
Enter the user name used for the SFTP connection here. This name can be up
to 32 characters long.
Enter the password used for the SFTP connection here. This password can be
up to 15 characters long.
Enter the source filename and path of the configuration file located on the
SFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long.
• Select the running-config option to restore and overwrite the running
configuration file on the Switch.
• Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
Figure 11-17 Configuration Backup to HTTP Window
Description
Enter the source filename and path of the configuration file located on the
Switch here. This field can be up to 64 characters long.
132