Certificate & Key Backup To Http; Certificate & Key Backup To Tftp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Destination File
Click the Restore button to initiate the certificate and key restore.
Certificate & Key Backup to HTTP
This window is used to initiate a certificate and key backup to a local PC using HTTP.
To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Backup button to initiate the certificate and key backup.
Certificate & Key Backup to TFTP
This window is used to initiate a certificate and key backup to a TFTP server.
To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to
TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Description
Enter the destination path and location where the new certificate and key
should be stored on the Switch. This field can be up to 64 characters long.
Figure 11-27 Certificate & Key Backup to HTTP Window
Description
Enter the source filename and path of the certificate and key file located on the
Switch here. This field can be up to 64 characters long.
Figure 11-28 Certificate & Key Backup to TFTP Window
Description
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option
is selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the source filename and path of the certificate and key file located on the
Switch here. This field can be up to 64 characters long.
139