Log Backup To Rcp; Log Backup To Sftp - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Destination File
Log Type
Click the Backup button to initiate the system log backup.

Log Backup to RCP

This window is used to initiate a system log backup to an RCP server.
To view the following window, click Tools > Log Backup > Log Backup to RCP, as shown below:
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Destination File
Log Type
Click the Backup button to initiate the system log backup.

Log Backup to SFTP

This window is used to initiate a system log backup to an SFTP server.
Description
Enter the destination path and location where the log file should be stored on
the TFTP server. This field can be up to 64 characters long.
Select the log type that will be backed up to the TFTP server.
• When the System Log option is selected, the system log will be backed
up.
• When the Attack Log is selected, the attack log will be backed up.
Figure 11-34 Log Backup to RCP Window
Description
Enter the RCP server IP address here.
Enter the user name used for the RCP connection here. This name can be up
to 32 characters long.
Enter the destination path and location where the log file should be stored on
the RCP server. This field can be up to 64 characters long.
Select the log type that will be backed up to the RCP server.
• When the System Log option is selected, the system log will be backed
up.
• When the Attack Log is selected, the attack log will be backed up.
143