Mstp Port Information; Link Aggregation - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Instance Priority
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

MSTP Port Information

This window is used to display and configure the MSTP port information settings.
To view the following window, click L2 Features > STP > MSTP Port Information, as shown below:
The fields that can be configured are described below:
Parameter
Port
Cost
Priority
Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Link Aggregation

Understanding Port Trunk Groups
Port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The
Switch supports up to 32 port trunk groups with up to 12 ports in each group.
Description
After clicking the Edit button, enter the Instance Priority value here. The range
is from 0 to 61440.
Figure 5-20 MSTP Port Information Window
Description
Select the port number that will be cleared here.
After clicking the Edit button, enter the cost value here. This value must be
between 1 and 200000000.
After clicking the Edit button, select the priority value here. Options to choose
from are 0 to 240. By default this option is 0. A lower value has higher priority.
69