DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Restore button to initiate the configuration restore.
Configuration Restore from RCP
This window is used to initiate a configuration restore from an RCP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from RCP,
as shown below:
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.
Configuration Restore from SFTP
This window is used to initiate a configuration restore from an SFTP server.
Figure 11-15 Configuration Restore from RCP Window
Description
Enter the RCP server IP address here.
Enter the user name used for the RCP connection here. This name can be up
to 32 characters long.
Enter the source filename and path of the configuration file located on the RCP
server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long.
• Select the running-config option to restore and overwrite the running
configuration file on the Switch.
• Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
131