Introduction; Purpose Of This Operating Guide; Trademarks; Additional Resources - Danfoss VLT HVAC Basic Drive FC 101 Operating Manual

Operating Guide | VLT® HVAC Basic Drive FC 101

1 Introduction

1.1 Purpose of this Operating Guide

This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instructions
and general warnings. Always keep this operating guide available with the drive.

1.2 Trademarks

®
VLT is a registered trademark for Danfoss A/S.

1.3 Additional Resources

1.3.1 Other Resources

Other resources are available to understand advanced drive functions and programming.
• The VLT® HVAC Basic Drive FC 101 Programming Guide provides information on how to program and includes complete parameter
descriptions.
• The VLT® HVAC Basic Drive FC 101 Design Guide provides all technical information about the drive. It also lists options and
accessories.
The technical documentation is available in electronic form online at www.danfoss.com.

1.3.2 MCT 10 Setup Software Support

Download the software from the service and support section on www.danfoss.com.
During the installation process of the software, enter access code 81463800 to activate the VLT® HVAC Basic Drive FC 101 functionality.
A license key is not required for using the VLT® HVAC Basic Drive FC 101 functionality.
The latest software does not always contain the latest updates for drives. Contact the local sales office for the latest drive updates (in
the form of *.upd files), or download the drive updates from the service and support section on www.danfoss.com.

1.4 Document and Software Version

The operating guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Document and Software Version
Edition
AQ275641848264en-000101
6 | Danfoss A/S © 2019.11
Remarks
Update to new software version.
Introduction
Software version
4.4x
AQ275641848264en-000101 / 132R0078