Installation
Operating Guide | VLT® HVAC Basic Drive FC 101
4. Mount the support bracket across the mains cables and tighten the screws as shown in the following illustration. Use the
tightening torques described in
3.2.1 Electrical Installation in
General.
Illustration 12:
Mounting the Support Bracket
3.2.3.8 Relays and Terminals on Enclosure Size H10
Illustration 13:
Enclosure Size H10 , IP20, 600 V, 11–15 kW (15–20 hp)
Danfoss A/S © 2019.11
AQ275641848264en-000101 / 132R0078| 25