Setup Wizard; Setup Wizard Introduction - Danfoss VLT HVAC Basic Drive FC 101 Operating Manual

Hide thumbs Also See for VLT HVAC Basic Drive FC 101:

Table of Contents

Operating Guide | VLT® HVAC Basic Drive FC 101

The triangle indicates if the LCP is in Status, Quick Menu, or Main Menu.

B. Menu key

Press [Menu] to select among Status, Quick Menu, or Main Menu.

C. Navigation keys and indicator lights

Table 14: Legend to Section C

Com. LED: Flashes during bus communication.

Green LED/On: Control section is working correctly.

Yellow LED/Warn.: Indicates a warning.

Flashing Red LED/Alarm: Indicates an alarm.

[Back]: For moving to the previous step or layer in the navigation structure.

[▵] [▿] [▹]: For navigating among parameter groups and parameters, and within parameters. They can also be used for setting

local reference.

[OK]: For selecting a parameter and for accepting changes to parameter settings.

D. Operation keys and indicator lights

Table 15: Legend to Section D

[Hand On]: Starts the motor and enables control of the drive via the LCP.

[2] Coast inverse is the default option for parameter 5-12 Terminal 27 Digital Input . If there is no 24 V supply to

terminal 27, [Hand On] does not start the motor. Connect terminal 12 to terminal 27.

[Off/Reset]: Stops the motor (Off). If in alarm mode, the alarm is reset.

[Auto On]: The drive is controlled either via control terminals or serial communication.

4.2 Setup Wizard

The built-in wizard menu guides the installer through the setup of the drive in a clear and structured manner for open-loop and closed-

loop applications, and for quick motor settings.

N O T I C E

Programming

AQ275641848264en-000101 / 132R0078

Table of Contents