Motor Thermal Protection - Danfoss VLT HVAC Basic Drive FC 101 Operating Manual

Operating Guide | VLT® HVAC Basic Drive FC 101
EQUIPMENT HAZARD
Contact with rotating shafts and electrical equipment can result in death or serious injury.
Ensure that only trained and qualified personnel perform installation, start-up, and maintenance.
-
Ensure that electrical work conforms to national and local electrical codes.
-
Follow the procedures in this manual.
-
INTERNAL FAILURE HAZARD
An internal failure in the drive can result in serious injury when the drive is not properly closed.
Ensure that all safety covers are in place and securely fastened before applying power.
-

2.4 Motor Thermal Protection

Procedure
1. Set parameter 1-90 Motor Thermal Protection to [4] ETR trip 1 to enable the motor thermal protection function.
Danfoss A/S © 2019.11
W A R N I N G
C A U T I O N
AQ275641848264en-000101 / 132R0078| 11
Safety