Function List - Mitsubishi Electric NZ2GN2S1-32D User Manual

3.3

Function List

This section lists the functions of I/O modules.
: Available, : Not available
Item
Input response time setting
function
Output HOLD/CLEAR
setting function
CC-Link IE Field Network
synchronous
communication function
Output ON/OFF information
hold function
Fast link-up function
Protection function
Module power supply
voltage drop detection
function
External power supply
monitoring function
Firmware update function
3 SPECIFICATIONS
64
3.3 Function List
Description
Prevents an incorrect input due to noise by setting
the response time required for the module to
recognize an actual input as the X signal.
Sets whether to hold or clear the last output value
when the I/O module is disconnected from data link,
when the CPU module operating status is STOP, or
when the CPU module operation is suspended by an
error.
Performs I/O with a synchronization cycle of the
master station that supports the CC-Link IE Field
Network synchronous communication function.
Checks whether the output has been turned on or
off.
Shortens the time taken for data link establishment
with the master station at power-on.
The transistor output module and the I/O combined
module (transistor output part) have the overload
protection function and the overheat protection
function.
Detects a voltage drop of the module power supply.
Monitors the ON/OFF status of the external power
supply.
Updates the firmware of the I/O module via CC-Link
IE TSN.
Function availability
Input Output
module module
 
 
 
 
 
 
 
 
 
Reference
I/O
combined
module
 Page 102
Input Response
Time Setting
Function
 Page 103
Output HOLD/
CLEAR Setting
Function
 Page 104 CC-
Link IE Field
Network
Synchronous
Communication
Function
 Page 116
Output ON/OFF
Information Hold
Function
 Page 112 Fast
Link-Up Function
 Page 117
Protection Function
 Page 118
Module Power
Supply Voltage
Drop Detection
Function
 Page 118
External Power
Supply Monitoring
Function
 Page 119
Firmware Update
Function