Mitsubishi Electric NZ2GN2S1-32D User Manual page 158

■How to clear an error using the command execution of slave station.
Follow the procedure below to clear an error using the command execution of slave station.
Operating procedure
1.
Select an I/O module from the station list on the "CC IE Field Configuration" window.
2.
Open the "Command Execution of Slave Station" window.
Right-click on the target I/O module  [Online]  [Command Execution of Slave Station]
3.
Set "Method selection" to "Error clear request", and click the [Execute] button.
11 TROUBLESHOOTING
156
11.6 Method for Checking Error Codes