Mitsubishi Electric NZ2GN2S1-32D User Manual page 103

Setting item list
Item
Station number
RX/RY setting Points
Start
End
RWw/RWr setting Points
Start
End
Network Synchronous Communication
Reserved/Error Invalid Station/System Switching
Monitoring Target Station
Description
Set the station number of the I/O module.
Set the assignment of RX/RY points in units of 16 points.
The RX/RY start number is displayed.
The RX/RY end number is displayed.
Set the assignment of RWw/RWr points in units of 4 points.
The RWw/RWr start number is displayed.
The RWw/RWr end number is displayed.
Set whether to use the network synchronous communication
setting for the I/O module.
Set this item when setting the I/O module as a reserved station
or error invalid station.
Setting range
1 to 120
16 to 2048 (Default value: 32)


4 to 1024 (Default value: 4)


• Asynchronous (Default value)
• Synchronous
• No setting (Default value)
• Reserved
• Error Invalid Station
• System Switching Monitoring
Target Station
7 PARAMETER SETTING
7.1 Network Configuration Setting
7
101