Mitsubishi Electric NZ2GN2S1-32D User Manual page 70

Applicable profile
A profile is required to use the I/O module in the CC IE Field Configuration setting.
The following table shows the applicable profile versions.
Model
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GN2S1-32T, NZ2GN2B1-32T, NZ2GN2S1-32TE,
NZ2GN2B1-32TE, NZ2GN2S1-32DT, NZ2GN2B1-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GNCF1-32T, NZ2GNCE3-32DT
When the latest profile of the I/O module is necessary, please consult your local Mitsubishi representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of devices supporting
the CC-Link family.
A module is added to "Module List" of the CC IE Field Configuration window by profile registration to the engineering tool of
the master station.
For the profile registration, refer to the following.
 GX Works3 Operating Manual
 GX Works2 Version 1 Operating Manual (Common)
Ethernet cable
For the specifications of the Ethernet cable, refer to the following.
 User's manual for the master/local module used
Hub
For compatible hubs, refer to the following.
 User's manual for the master/local module used
5 SYSTEM CONFIGURATION
68
5.1 Applicable Systems
Firmware version
"02" or later
"02" or later
Version
"00" or later
"00" or later