Mitsubishi Electric NZ2GN2S1-32D User Manual page 138

Remote reset
Perform the following operation to remotely reset a selected I/O module.
Operating procedure
1.
Select a slave station to be reset and click the [Remote Operation] button.
2.
Follow the on-screen instructions and click the [Yes] button.
3.
Follow the on-screen instructions and click the [OK] button.
Precautions
■Setting of function setting switches
When remote reset is performed, if the setting of function setting switch 1 is different from the setting at power-on, remote
reset disable error (error code: 0270H) occurs, and the I/O module is not reset.
11 TROUBLESHOOTING
136
11.1 CC-Link IE TSN/CC-Link IE Field Diagnostics