4.
When the following window appears, click the [OK] button.
5.
An error on the I/O module is cleared.
Checking by using CC IE Field configuration
■How to check an error using the command execution of slave station
Follow the procedure below to check an error using the command execution of slave station.
Operating procedure
1.
Select an I/O module from the station list on the "CC IE Field Configuration" window.
2.
Open the "Command Execution of Slave Station" window.
Right-click on the target I/O module [Online] [Command Execution of Slave Station]
11 TROUBLESHOOTING
11.6 Method for Checking Error Codes
11
157