Terms; Generic Terms And Abbreviations - Mitsubishi Electric NZ2GN2S1-32D User Manual

Programmable controller cc-link ie tsn remote i/o module
Hide thumbs Also See for NZ2GN2S1-32D:
Table of Contents

Advertisement

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
Cyclic transmission
Data link
Engineering tool
Intelligent device station
Link device
Local station
Master station
Reserved station
Slave station
Transient transmission

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
A/D converter module
CC-Link IE TSN remote module
D/A converter module
I/O combined module
I/O module
Input module
Output module
REMFR
REMFRD
REMTO
REMTOD
RWr
RWw
RX
RY
Description
A function by which data are periodically exchanged among stations on the same network using link devices
Communications performed by cyclic transmission and transient transmission
A tool used for setting up programmable controllers, programming, debugging, and maintenance
A station that exchanges I/O signals (bit data) and I/O data (word data) with the master station by cyclic transmission.
This station can perform transient transmission as well.
This station responds to a transient transmission request from another station and also issues a transient transmission
request to another station.
A device (RX, RY, RWr, RWw, SB, or SW) in a module or a board on CC-Link IE Field Network
A station that performs cyclic transmission and transient transmission with the master station and other local stations.
A station that controls the entire network. This station can perform cyclic transmission and transient transmission with all
stations.
Only one master station can be used in a network.
A station reserved for future use. This station is not actually connected, but counted as a connected station.
A station other than a master station: a local station, a remote I/O station, a remote device station, and an intelligent
device station
A function of communication with another station, which is used when requested by a dedicated instruction or an
engineering tool
Description
An abbreviation for the CC-Link IE TSN analog-digital converter module
A generic term for an A/D converter module, a D/A converter module, an I/O module
An abbreviation for the CC-Link IE TSN digital-analog converter module
A generic term for modules that can input and output a digital signal
An abbreviation for the CC-Link IE TSN remote I/O module
A generic term for modules that can input a digital signal
A generic term for modules that can output a digital signal
The abbreviation for ZP.REMFR.
An abbreviation for JP.REMFRD
The abbreviation for ZP.REMTO.
An abbreviation for JP.REMTOD
An abbreviation for the remote register of link device. RWr refers to word data input from a slave station to the master
station (For some areas in a local station, data are input in the opposite direction.)
An abbreviation for the remote register of link device. RWw refers to word data output from the master station to a slave
station (For some areas in a local station, data are output in the opposite direction.)
An abbreviation for remote input of link device. Bit data input from a slave station to the master station (For some areas
in a local station, data are input in the opposite direction.)
An abbreviation for remote output of link device. Bit data output from the master station to a slave station (For some
areas in a local station, data are output in the opposite direction.)
11

Advertisement

Table of Contents
loading

Table of Contents