Mitsubishi Electric NZ2GN2S1-32D User Manual page 115

Setting method
Set the fast link-up function for each port.
Set whether to enable or disable the fast link-up function of P1 by using function setting switch 8 of the module, and the fast
link-up function of P2 by using function setting switch 9 of the module.
(1) Function setting switch 8 and function setting switch 9
Switch
Function setting switch 8
Function setting switch 9
The status of whether this function is enabled or disabled is determined by the statuses of function setting switch 8 and
function setting switch 9 at I/O module startup.
After the I/O module was started up, if the state of function setting switch 8 is changed, Function setting switch 8 changed
error (error code: 0208H) occurs, and if the state of function setting switch 9 was changed, Function setting switch 9 changed
error (error code: 0209H) occurs. The status of whether this function is enabled or disabled is not changed.
■Checking the status of the fast link-up function (enabled/disabled)
The current status of the fast link-up function (enabled/disabled) can be checked with Fast link-up setting status (PORT1)
(RWr2.b6) and Fast link-up setting status (PORT2) (RWr2.b7).
Page 179 Fast link-up setting status (PORT1) (RWr2.b6)
Page 180 Fast link-up setting status (PORT2) (RWr2.b7)
(1)
State Setting value
On Fast link-up function of P1: Enabled
Off Fast link-up function of P1: Disabled (Factory default)
On Fast link-up function of P2: Enabled
Off Fast link-up function of P2: Disabled (Factory default)
8 FUNCTIONS
113
8.4 Fast Link-Up Function
8