Dimensions; Installation Type - AEG EWH Basis Series Operating And Installation Instructions

2.8

Dimensions 4

Dimensions of storage heater (see table "Technical specifications")
1 Heating flange
2 Magnesium anode
3 Delivery pipe
4 Temperature selection knob
5 Mounting bracket
6 Signal lamp
2.9

Installation type 3

1 Safety valve
2 Non-return valve
3 Pressure test connection
4 Stop valve
5 Pressure reducer
6 Drawing points
7 Drain outlet / siphon
Guarantee
For guarantees please refer to the respective terms and conditions of supply for your country.
The installation, electrical connection and first operation of this appliance should be carried out by a qualified
!
installer.
The company does not accept liability for failure of any goods supplied which have not been installed and
!
operated inaccordance with the manufacturer's instructions.
Environment and recycling
Recycling of obselete appliances
Appliances with this label must not be disposed off with the general waste. They must be collected separately and disposed off
according to local regulations.
For the fitter
11