Functional Specifications - Xerox Phaser 6120 Service Manual

Functional Specifications

Warm-up Time 110 V to 127 V
(at ambient
temperature of 23° C/
220 V to 240 V
73.4° F and rated
source
voltage)
System Speed Plain paper
Thick stock
OHP film
First-Page-Out Time Full Color
(Plain Paper)
Monochrome
Print Speed Full Color
(Plain Paper)
Monochrome
Tray Capacities Plain paper and letterhead:200 sheets
Transparencies, thick stock, postcards, labels stock,
and glossy stock:50 sheets
Envelopes:10 sheets
Hard Drive Option 20 GB
Tilt Operating at maximum tilt angle of 2º
Printable Area Non-printable area: 4 mm (0.16") from edge (top, bottom, left and right) of
listed media sizes except legal size. For Legal size the bottom 16 mm is black
(Margins)
only, color printing area only reach 335.6 mm from top edge.
Side Print Position Accuracy: 4 mm +/- 2.0 mm (0.08 in.)
Top/Bottom Print Position Accuracy: 4mm +/-2.5 mm (0.1 in.)
Skew Simplex Printing
Duplex Printing (front to
back)
Output paper stacking In feeding direction: +/- 9 mm
In side direction: +/- 9 mm
Occasionally, a piece of paper may get pushed out by another paper, this
occurrence rate should be less than 1 for every 50 sheet and less than 50 mm.
The scattering should be tested with either Xerox 4024 75 gsm paper or Xerox
4200 75 gsm paper.
Color Registrations Vertical: Plain paper at all zones; average 0.12 mm
Horizontal: Plain paper at all zones; average 0.12 mm
Print Magnification Vertical (applied to 270.9 mm (10.67 in.) length) < 2.0 mm (0.08") (0.74%)
Horizontal (applied to 184.2 mm (7.25 in.) length) < 1.2 mm (0.05 in.)
(0.65%)
Phaser® 6120 Color Laser Printer Service Manual
Print Engine General Information
Average: 52 seconds
Average: 55 seconds
126.78 mm/second
63.39 mm/second
42.26 mm/second
1-sided: 22 seconds
2-sided: 35 seconds
1-sided: 13 seconds
2-sided: 26 seconds
1-sided: 5 pages/minute
2-sided: 5 pages/minute
1-sided: 20 pages/minute
2-sided: 11.4 pages/minute
A rectangular box of 189 mm by 256 mm will be
used to measure skew.
A. Vertical skew a < ±2.0 mm (0.08")
B. Horizontal skew b < ±1.5 mm (0.06")
A. Vertical skew a < 3.0 mm (0.12")
B. Horizontal skew b < 2.5 mm (0.10")
1-7