A-1 Saving And Reading The Project; A-1-1 Saving The Project; A-1-2 Reading And Downloading The Project - Omron CK3E Series Connection Manual

Appendices

A-1 Saving and Reading the Project

This appendix describes the procedure to save the Power PMAC IDE project to the computer for the
purpose of reuse.
A-1-1
Saving the Project
1
Saving the Project
Select Save All from the File menu to
save the project to the computer.
A-1-2 Reading and Downloading the Project
1
Start up and connect Power PMAC IDE
to the Controller.
2
Execute the $$$*** command from the
Terminal to revert the PMAC to the fac-
tory default settings.
3
From the File menu, select Open –
Project/Solution to read the saved
project.
A-2
CK3E/CK3M-series EtherNet/IP Connection Guide (O903)