Do Mode; Input Data; Table 38: Do Input Data In The Process Image - WAGO 767-5803 Manual

WAGO-SPEEDWAY 767
767-5803 8DIO 24V DC 0,5A (8xM12)
Pos : 37 /Serie 767 ( WAGO-SPEED WAY)/Proz ess abbild/I/O-Module/Proz ess abbil d 767-580x Ein- und Ausgangsdaten @ 7\mod_1268117983077_21.doc x @ 52010 @ 233233233233233 @ 1
8.1

DO Mode

8.1.1

Input Data

The image for the process data, which are transmitted from the I/O module to the
fieldbus coupler, has a size of 0 byte. If you configure synchronous diagnostic
data for the I/O module, the process image has a size of 2 bytes.
The byte configuration is as follow:

Table 38: DO input data in the process image

Byte 0
Byte 1
Manual
Version 1.1.0
7
| | | | |
| | | | |
| | | | |
| | | | | 1
| | | | 1 : Overtemperature on channel 4
B
| | | 1 : Overtemperature on channel 5
B
| | 1 : Overtemperature on channel 6
B
| 1 : Overtemperature on channel 7
B
1 : Overtemperature on channel 8
B
7
\ /
-------- -------- |
\/
| |
| |
| | 1
| 1 : Undervoltage U
B
Not assigned: always 0
0
Diagnostic message
| | |
| | 1 : Overtemperature on channel 1
B
| 1 : Overtemperature on channel 2
B
: Overtemperature on channel 3
B
0
Diagnostic message
| | |
| | 1 : Short circuit/overload field supply
B
| always 0
: Undervoltage U
B LS
A
Process Image 67