Configurable Functions For Counters; Table 18: Technical Data - Configurable Functions For Counters - WAGO 767-5803 Manual

28 Device Description
3.7.11

Configurable functions for counters

Table 18: Technical data – Configurable functions for counters
Counter mode
Gate time basis
Gate, Configuration via ...
Gate
Count direction, Configuration
via ...
Count direction
Allow counter overwrap
(jump from 65535 -> 0 or from
0 -> 65535)
Counter start value / limit value
Set start value/limit value
Count direction forward:
Set counter value to 0. Limit
value is to be specified.
Count direction backward:
Start value is to be specified
Limit value output
Count direction forward:
Limit value output is set active
upon reaching the counter value
"Limit value"
Count direction backward:
Limit value outoupt is set active
upon reaching the counter value 0
Limit value reset
Count direction forward:
Set counter value to 0 upon
reaching limit value
Count direction backward:
Set counter value to start value at
counter value 0
Counter reset
(when limits are exceeded)
767-5803 8DIO 24V DC 0,5A (8xM12)
- Event counter
- Gate time measurement
- Pulse duration counter
1 ms
10 ms
100 ms
1 s
10 s
- Process data
- Digital input
- Enabled
- Disabled
- Process data
- Digital input
- Forward
- Backward
- Disabled
- Enabled
Value: 0 ... 65535
Set value
- Do not use
- Use
- Disabled
- Enabled
- Disabled
- Enabled
WAGO-SPEEDWAY 767
Manual
Version 1.1.0