Output Data; Table 41: Di Output Data In The Process Image - WAGO 767-5803 Manual

70 Process Image
8.2.2

Output Data

The image for the process data, which are transmitted by the fieldbus coupler to
the I/O module, has a size of 0 byte. If you configure a synchronous diagnostic
confirmation of the I/O module, the process image has a size of 2 bytes.
The diagnostic confirmation is structured as follows:

Table 41: DI output data in the process image

Byte 0
Byte 1
7
\
----------------- -----------------
\/
Not assigned: always 0
7
\ /
-------- -------- |
\/
| |
| |
| |
| | 1
| 1 : Undervoltage U
B
Not assigned: always 0
767-5803 8DIO 24V DC 0,5A (8xM12)
0
Diagnostic confirmation
/
0
Diagnostic confirmation
| | |
| | 1 : Short circuit/overload
B
| | field supply confirmed
| Not assigned
: Undervoltage U
B LS
confirmed
A
WAGO-SPEEDWAY 767
confirmed
Version 1.1.0
Manual